Flowmasonic

CLAMP ON TDS 100F Flowmeter
CLAMP ON TDS 100F Flowmeter

CLAMP ON TDS 100F Flowmeter

1 minute, 20 seconds Read

Clamp-on Ultrasonic Flow Meter TDS 100

Features

  • Non-invasive clamp-on Technology
  • Easy to install
  • No pressure drop, moving parts, leakage or corrosion
  • No pipe cutting or process interruption
  • Measurement independent of fluid properties
  • Wide Bi-directional flow range
  • The sensors being clamp-on type, there’s no pressure loss. The sensors are easily mounted on the surface of the pipe without interrupting the flow for installation or maintenance.
  • Advanced intelligent display, computation, and printing(data logger) to suit user’s diversified requirements.  The flow is displayed in all pertinent engineering units. It runs out of regular AC power (110V/220V),  or DC power.
  • Signal outputs including current signal, frequency signal, serial data, switch outputs(1 OCT and 1 relay output). All the outputs displayed on the unit can be transmitted to a PC via RS-232/485 for further processing or storage.

Specification

Accuracy  ≤1%
Repeatability  0.2%
Linearity  0.5%
Velocity  Range  0~±10m/s, Bi-directional measurement
Pipe Size  DN32~DN6000mm
Temperature  -30°C~160°C
Type of Liquid Single liquid than can transmit ultrasound, such as water, seawater, sewage, oil, alcohol, etc.
Pipe Material Steel, stainless steel, cast iron, copper, PVC, Aluminum, glass steel, etc. Liner is allowed.
Signal Output
  • 1 way 4-20mA output1 way OCT pulse output
  • 1-way Relay output
Signal Input  3 way 4-20mA input, achieve to heat measurement by connecting PT100 platinum resistor
Interface RS485, support MODBUS
Units (User Configured) Rate: Meter, feet, cubic meter, cubic feet, USA gallon, oil barrel, USA liquid barrel, imperial liquid barrel, million USA gallons times: second, minute, hour, day
Data Storage SD card  Data Logger: Built-in, stores over 2000 lines of data
Power Supply  DC8~36V or AC85~264V

Similar Posts

Skip to content