Flowmasonic

EGE SDV 652 – Vortex Flow Sensor
EGE SDV 652 – Vortex Flow Sensor

EGE SDV 652 – Vortex Flow Sensor

1 minute, 0 seconds Read

Ege water Flow Meter

The flow meter devices Series SDV 652 is based on the vortex principle. They are well suitable for applications, where a good linearity and larger measurement precision is necessary. They are insensitive to quick temperature changes and the reaction time of the device is below one second.

The vortex principle allows a flow measurement without moving parts: Behind a bluff body in the flow, vortexes are generated which are detected by the device and yield the flow velocity.

  • Flow measuring of water
  • Deviation 2% of terminal value
  • Programmable
  • Analog and PNP output

Spesification

Dimensions
Working range 2…20 l/min
Maximum flow 25 l/min
Precision 15…50 °C < 2%, 5…60 °C < 4%
Outer diameter pipe 10 mm
Pipe connection tube fittings for steel tubes accord. to DIN 2391 / ISO 3304
Output
ID-No. P11319
Type SDV 652/1 GAPP
Switching current  200 mA
Load RL 200…500 Ω
Supply voltage 24 DC ±10% V
Current consumption <100 mA
Ambient temperature 0…+60 °C
Medium temperature 5…+60 °C
Start-up time 4.5…8 s
Reaction time 0.5…4 s
Programmable functions switching point, hysteresis, switching output, time on/off delay, averaging, acess code
Compressive strength 10 bar
Material housing PBT sensor: PVDF, connection AISI 316 Ti
Protection IP 65 EN 60529
Connection M12 connector
Note:Process connection in PTFE available
untuk info product dan harga silahkan hubungi  : marketing@wmablog.com

Similar Posts

Skip to content