Flowmasonic

Rheonik RHE14 Low-cost Mass Flow Transmitter
Rheonik RHE14 Low-cost Mass Flow Transmitter

Rheonik RHE14 Low-cost Mass Flow Transmitter

1 minute, 8 seconds Read

The RHE14 is a low-cost mass flow transmitter ideal for OEM and embedded system use. The RHE14 is a DIN rail mount and configured through a native RS232 data port. The RHE14 can be used with all RHM Coriolis Sensors.

MEASUREMENTS Mass Flow Temperature
 OUTPUTS 1 Analog
1 Pulse / Frequency
 2 Digital
INPUTS 1 Remote Zero
INTERFACES RS 232 HART

Applications

  • Filling and dispensing
  • Liquid and gas applications
  • Feedstocks and transfers

General Specifications

Housing: DIN rail mounting enclosure (polycarbonate (PC) and polyphenylene oxide (PPO))
Enclosure Rating: IP 20
Ambient Temperature: -40°C to +65°C (-40°F to +149°F)
Dimensions: 70 x 86 x 58 mm (2.76 x 3.39 x 2.28 in)
Operation: Via serial port using SensCom PC software
Sensor Cable Connection: Screw terminals
Analog Outputs: 1 active 4-20 mA output, configurable for mass flow or temperature
Pulse Outputs: 2 outputs, one active (TTL, IOHmax = -0.4 mA, IOLmax = 8 mA), one passive(Opto-isolated open collector type, Fmax = 10 kHz, Umax = 24 V, Imax= 10mA(requires external power supply and site installed current limiting/pull up resistor))operating in tandem
Digital Outputs: 2 digital outputs individually configurable as either active or passive(requires external power supply and site installed current limiting/pull up resistors) for error and flow direction
Digital Inputs: 1 input for remote zero
Power Supply: 8 – 28 VDC +/- 10%
Digital Data Communications: RS232 with either HART or Rheonik simple ASCII protocol
Weight: 0.2 kg (0.44 lb)

More Information: Brochure RHE14

untuk info product dan harga silahkan hubungi  : marketing@wmablog.com

Similar Posts

Skip to content