Flowmasonic

Seametrics SES- Single Jet Low Flow Meter
Seametrics SES- Single Jet Low Flow Meter

Seametrics SES- Single Jet Low Flow Meter

1 minute, 16 seconds Read

Stainless Flow Meter | Seametrics Single Jet Low Flow Meter

Turbine Paddle Flow Meter

The SES single-jet meter provides accurate, wide range flow metering in an extremely rugged stainless steel package. Single-jet simplicity combined with high-quality jewel bearings results in long life and a relatively high tolerance for problem fluids.

Typical applications are chemical batching, proportional chemical injection, fertilizer injection, proportioning of spray chemicals, and general flow rate monitoring. The sensor is easily replaced from outside the meter and is compatible with most of the Seametrics indicators and transmitters, as well as most controls and PLC’s that accept DC inputs.

The standard rotor is PVDF (Kynar®) and the shaft is special nickel-bonded tungsten carbide. The optional ceramic shaft increases resistance to some concentrated chemicals. The standard O-ring is Teflon®-coated Viton®.

Features

  • Accurate at low flows
  • Simple and durable
  • Rugged body
  • High tolerance for problem fluids

Application

  • Low flow monitoring
  • Chemical batching
  • Proportional chemical injection
  • Fertilizer injection

Specification

Connection Ports 1/2”, 3/4”, 1” —Female NPT thread
Sensor Cable 18 ft (6 m) standard—maximum cable run 2000 ft (607 m
Materials Body 316 stainless steel
Rotor PVDF (Kynar®)—2 magnet (6 magnets high-resolution optional
Shaft Nickel-bonded tungsten carbide (ceramic or silicon carbide optional)
O-Ring Teflon®-coated Viton®(Viton® or EDPM optional)
Bearings Ruby ring and ball
Cover 316 stainless steel
Maximum Temperature 200 ̊ F (93 ̊ C)
Maximum Pressure 500 psi (35 bar)
Accuracy ±1% of the full scale
Power Standard 6–36 Vdc, < 2 mA
Micropower 3.1–16 Vdc, 60 μA @ 3.6 Vdc (for FT450 and DL76 only)
Outputs Current sinking pulse, 6–24 Vdc

Download Datasheet: Seametrics SES

Similar Posts

Skip to content