Flowmasonic

TCM 0325 TRICOR Coriolis Mass Flow Meter
TCM 0325 TRICOR Coriolis Mass Flow Meter

TCM 0325 TRICOR Coriolis Mass Flow Meter

2 minutes, 12 seconds Read

TRICOR TCM 0325 Mass Flow Meter

TRICOR CLASSIC Series TCM 0325 Coriolis Mass Flow Meter memiliki laju aliran massa maksimum 325 kg / jam (12 lb / mnt) atau 49 bbl / hari dan ukuran nominal DN4 (1/8 “), dan nilai untuk tekanan proses hingga 200 bar (2900 psi). Akurasi standar untuk TCM 0325 adalah 0,3%. Tetapi dengan kalibrasi khusus, akurasi 0,1% dimungkinkan. Desain tabung bentuk berlian (bentuk-D) memiliki kinerja keseluruhan terbaik dari semua bentuk tabung Coriolis. Keuntungan mekanis dari desain ini termasuk rasio signal-to-noise terbaik dan mengurangi efek getaran eksternal, sehingga meningkatkan stabilitas nol.

Mass Flow Rate (max.): 325 kg/h  12 lb/min
Volumetric Flow Rate (max.): 325 l/h 1.43 gpm, 49 bbl/d (US)
Pressure Rating: 200 bar 2,900 psi
Nominal Meter Size: DN4 1/8″

Technical Data

FLOW RATE
Mass Flow Rate (max.): 325 kg/h, 12 lb/min
Volumetric Flow Rate (max.): 325 l/h, 1.43 gpm, 49 bbl/d (US)
PRESSURE
Standard Pressure Rating: up to 200 bar, 2900 psi (option: up to 345 bar, 5,000 psi)¹
ACCURACY (LIQUIDS)²
Basic Accuracy (Mass flow)³: ±0.3 % (option: up to ±0.1 %) of flow rate
Mass Flow Repeatability: ±0.05 % of flow rate
Basic Accuracy (Volume flow)³: ±0.4 % (option: up to ±0.15 %) of flow rate
Volume Flow Repeatability: ±0.05 % of flow rate
Zero Stability: ±0.01 % of full scale
ACCURACY (GASES)
Basic Accuracy (Mass flow)³: ±1 % (option: up to ±0.5 %) of flow rate
Mass Flow Repeatability: ±0.25 % of flow rate
DENSITY
Density Range: up to 2500 kg/m³, 2.5 g/cm³
Density Accuracy:³ ±5.0 kg/m³ (option: ±1.0 kg/m³), ±0.005 g/cm³ (option: ±0.001 kg/m³)
Density Repeatability: ±0.5 kg/m³, ±0.0005 g/cm³
TEMPERATURE
Process Temperature Range: Standard: -40 °C … +100 °C (-40 °F … +212 °F )
Optional: -60 °C … +200 °C (-76 °F … +392 °F )
Temperature Accuracy: ±1 °C ±0.5 % of reading (±1.8 °F ± 0.5% of reading )
Temperature Repeatability: ±0.2 °C (±0.36 °F )
MATERIALS OF CONSTRUCTIONS (wetted parts)
Tubes: 1.4404/AISI 316L
Case: 1.4404/AISI 316L
Flow splitter: 1.4404/AISI 316L
Brazing Alloy: BNi-2
EX CERTIFICATIONS
ATEX (Ex): Zone 1: Group IIC or IIB, T2…T4
ATEX (Exn): Zone 2: II 3G Ex nA IIC T2…T4 Gc
IECEx (Ex): Zone 1: Group IIC or IIB, T2…T4
cCSAus (Ex1): Class I, Division 1: Group A, B, C, D or C, D, T2…T4
For Ex1, Ex3, EAC (TR-CU) the electronic is only available in an aluminum housing.
ATEX + IECEx + cCSAus triple approval (Ex3): Zone 1: Group IIC or IIB, T2…T4 and Class I, Division 1: Group A, B, C, D or C, D, T2…T4
For Ex1, Ex3, EAC (TR-CU) the electronic is only available in an aluminum housing. Only with remote electronics.
EAC (TR-CU): Group IIC or IIB, T2…T4
For Ex1, Ex3, EAC (TR-CU) the electronic is only available in an aluminum housing.

¹The 200 bar standard pressure rating is per ASME. The 345 bar option is non-ASME rated.
²Stated flow accuracy combines the effects of repeatability, linearity and hysteresis.
³Calibration certificate options for higher accuracy are available.

untuk info product dan harga silahkan hubungi  : marketing@wmablog.com

Similar Posts

Skip to content