Flowmasonic

Flowmasonic WUF 500 Clamp On Ultrasonic Flow Meter For Water
Flowmasonic WUF 500 Clamp On Ultrasonic Flow Meter For Water

Flowmasonic WUF 500 Clamp On Ultrasonic Flow Meter For Water

3 minutes, 7 seconds Read

Ultrasonic Flow Meter | Water flow Meter | Flowmasonic WUF 500

Ultrasonic water flow meters are currently very popular with instrument engineers especially in the type of clamp on installations. This is because the installation is fast and easy. How to install, no need to cut or punch a pipe, but the transducer is enough to be attached to the outer surface of the treated pipe.

The Flowmasonic WUF 500 Clamp-On Ultrasonic Flow Meter is a state-of-the-art universal transit-time Flow meter designed using SLSI technology and low voltage broadband pulse transmission. While principally designed for the clean liquid application, the instrument is tolerant of liquids with small amounts of air bubbles or suspended solids found in most industrial environments.

Features

ultrasonic flow transmitterSensor ultrasonic clamp on flow meter

With distinctive features such as high precision, high reliability, high capability, and low cost, the Flowmeter features other advantages:

1. SLSI technology designed. Less hardware component, low voltage broadband pulse transmission, low consumption power, high reliability, anti-jamming, and outstanding applicability.

2. User-friendly menu designed. Parameter of pipe range, pipe material, pipe wall thickness, output signal, etc. can be conveniently entered via the windows.
U.S., British and Metric measurement units are available.

3. Daily, monthly and yearly totalized flow: Totalized flow for the last 64 days and months as well as for the last 5 years are may be viewed.
Power 0n/off function: allow the viewing of time and flow rate as power is switched on and off 64 times. Also, the Flowmeter has a manual or automatic amendment during offline sessions.
Self-contained signal output, open collector, frequency.

4. Parallel operation of positive, negative and net flow totalizes with scale factor (span) and 7 digit display, while the output of totalize pulse and frequency output transmitted via the open collector.

Specification

Performance specifications

Flow Range 0∼±16 ft/s (0∼±5m/s)
Accuracy ±1.0% of measured value (for 0.5∼4.0 m/s or 1.5∼13 f/s)
Repeatability 0.3%
Pipe Size 1 inch to 32 inches (25 mm to 800 mm)
Fluid Water
Pipe Material Carbon Steel, Stainless Steel, PVC

Function Specifications

Outputs Pulse Output: 0∼9999 Hz, OCT, (min. and max. frequency is adjustable)
Relay Output : 1A/30VDC, 0.3A/125VAC
Analog Output (Optional): 4∼20mA max load 750Ω
Input Interface (optional) RTD 2*PT100 interface excludes PT100 transducer
Two wires or three wires system 0 180 32 35
Communication Interface RS323 (standard)
RS485 (optional)
Baud rate 9600bps∼115200bps
Power Supply 10∼24VAC or 10∼36 VDC 1A (max)
Keypad 16 ( 4×4) key with tactile action
Display 40 character, 2 lines (20×2) lattice alphanumeric, backlit LCD
Temperature Transmitter: -10ºC∼50ºC
Transducer: 0ºC∼60ºC
Humidity Up to 99% RH, non-condensing

Physical Specifications

Transmitter PC/ABS IP65
Transducer Encapsulated design, IP68
Double-shielded Transducer Cable Standard/Maximum cable length: 30 ft/ 1000ft (9m/305m)
Weight Transmitter: approximately 0.7 kg
Transducer: approximately 0.4 kg

How it Works Flowmasonic WUF 500

Flowmasonic WUF 500 works by measuring the speed of water flow using ultrasound. So the calculation of the flowing volume can be read on the ultrasonic transmitter WUF 500.

Using an ultrasonic sensor or ultrasonic transducer can measure the average speed of fluid flow in a pipe.

The principle of the WUF 500 ultrasonic flowmeter is to measure the average time difference between the sending and receiving signals with the direction of flow. So we get flow velocity., Which is then calculated by the area of ​​the pipe cross section, we can get flow rate or volume flow flow in the pipe.

The type of fowmeter clamp on ultrasonic WUF 500 CF consists of an ultrasonic sensor or transducer and a flow computer or ultrasonic transmitter.

The function of the ultrasonic transducer is as a sensor to detect the speed of water flow in the pipe which is forwarded to the ultrasonic flow transmitter.

The data is then processed by calculating the distance calculation to the time difference from the ultrasonic sound wave emission so that the velocity of the ciran in the pipe can be obtained.

untuk info product dan harga silahkan hubungi  : sales@wmablog.com

Similar Posts

Skip to content