Flowmasonic

Dwyer TFP-GI Series Gas Turbine Flow Meter
Dwyer TFP-GI Series Gas Turbine Flow Meter

Dwyer TFP-GI Series Gas Turbine Flow Meter

1 minute, 24 seconds Read

Dwyer TFP-GI Series Gas Turbine Flow Meter is suitable for a wide variety of industrial, commercial, and laboratory flow applications. These meters utilize a turbine wheel and electro-optical detection to convert flow rates into a linear 0 to 5 VDC output signal for recording and data logging. A 3-1/2 digit LCD informs the user of the actual flow rate. A power adapter or mating cable assembly is required for operation.

Turbine sensors with electrical transmission output for remote indication of liquid flow rate. Dwyer turbine flow transmitters are suitable for a wide variety of industrial, commercial, and laboratory flow applications. A power adapter or mating cable assembly is required for operation.

Dwyer TFP-GI Series Features

  • A 3-1/2 digit LCD informs the user of the actual flow rate
  • flow rates into a linear 0 to 5 VDC output signal for recording and data logging
Another Article:

Specification

Service Clean dry gases compatible with wetted materials.
Wetted Materials PPS, acetal, sapphire, glass, epoxy, and fluoroelastomer.
Accuracy ±3% of full scale.
Linearity ±3% of full scale.
Repeatability ±0.5% of full scale.
Temperature Limits: 41 to 131°F (5 to 55°C); Storage: 32 to 158°F (0 to 70°C); Sensitivity: ±0.2% of full scale per °C.
Pressure Limits 40 psig (2.8 bar).
Process Connection Compression fitting
Power Requirements 11.5 to 15 VDC.
Power Consumption 35 mA @ 12 VDC.
Output Signal 0 to 5 VDC: Minimum 2.5 kΩ load.
Electrical Connections Four-pin power and signal connector. A power adapter or mating cable required for operation.
Display LCD, 0.39″ (10 mm) digits (only in LPM).
Enclosure Rating IP10 (NEMA 1).
Weight 0.23 lb (101 g).
Agency Approvals CE.

Download Data Sheet: Series TFP-GI Gas Turbine Flow Meter

Ref: dwyer-inst.com

Similar Posts

Skip to content