Plastic Body Magnetic FlowMeter

WMP –Series
The WMP-Series is a full-bore, plastic-bodied electromagnetic flow meter designed for flow and usage monitoring applications in 1, 2 and 3 inch pipe. The polypropylene flow tube offers corrosion resistance to a wide range of chemicals and fertilizers. It is light weight and easy to install or remove from the pipe for inspection.


A hinged polyethylene cover is included that protects from dust and UV rays, while permitting easy access to the flow rate and total display. The electronics housing can be fitted with cross-drilled screws and seal wire for tamper-evidence. Flow rate and total can be displayed in a variety of units, customer-selected and factory-set.

With no moving parts, the magmeter permits unobstructed flow,minimizing flow disturbances and straight pipe requirements. The WMPSeriescan be used in piping configurations where there is little space between the meter and an elbow or valve. The WMP-Series is resistant to wear from sand and debris found in ground or surface water. Since there are no bearings or propeller to wear out, maintenance and repaircosts are kept to a minimum and it tolerates high flows without damage.

The WMP104 is a battery-operated unit for use when pulse output is not required. The standard batteries are user replaceable with an approximate 1 year life depending on usage. An extended battery life option offers an estimated 2-4 year life depending on usage.

The WMP101 is externally powered via a 5-pin connector cable (20ft/6m)which also provides puls  output for use with a variety of Seametrics and other displays and controls for remote reading, data logging, pulse-toanalog conversion, and telemetry applications.

In the event of DC power loss, or when changing batteries, the WMP will retain internal settings and flow total.



  • Industrial wastewater discharge
  • Grey water
  • Well monitoring
  • Irrigation
  • Mining

Specifications* :




Skip to content