Stainless Flow Meter | Seametrics Single Jet Low Flow Meter
Turbine Paddle Flow Meter
The SES single-jet meter provides accurate, wide range flow metering in an extremely rugged stainless steel package. Single-jet simplicity combined with high-quality jewel bearings results in long life and a relatively high tolerance for problem fluids.
Typical applications are chemical batching, proportional chemical injection, fertilizer injection, proportioning of spray chemicals, and general flow rate monitoring. The sensor is easily replaced from outside the meter and is compatible with most of the Seametrics indicators and transmitters, as well as most controls and PLC’s that accept DC inputs.
The standard rotor is PVDF (Kynar®) and the shaft is special nickel-bonded tungsten carbide. The optional ceramic shaft increases resistance to some concentrated chemicals. The standard O-ring is Teflon®-coated Viton®.
Features
- Accurate at low flows
- Simple and durable
- Rugged body
- High tolerance for problem fluids
Application
- Low flow monitoring
- Chemical batching
- Proportional chemical injection
- Fertilizer injection
Specification
| Connection Ports | 1/2”, 3/4”, 1” —Female NPT thread | |
| Sensor Cable | 18 ft (6 m) standard—maximum cable run 2000 ft (607 m | |
| Materials | Body | 316 stainless steel |
| Rotor | PVDF (Kynar®)—2 magnet (6 magnets high-resolution optional | |
| Shaft | Nickel-bonded tungsten carbide (ceramic or silicon carbide optional) | |
| O-Ring | Teflon®-coated Viton®(Viton® or EDPM optional) | |
| Bearings | Ruby ring and ball | |
| Cover | 316 stainless steel | |
| Maximum Temperature | 200 ̊ F (93 ̊ C) | |
| Maximum Pressure | 500 psi (35 bar) | |
| Accuracy | ±1% of the full scale | |
| Power | Standard | 6–36 Vdc, < 2 mA |
| Micropower | 3.1–16 Vdc, 60 μA @ 3.6 Vdc (for FT450 and DL76 only) | |
| Outputs | Current sinking pulse, 6–24 Vdc | |