Compact Type Xonic 10 L® series clamp on ultrasonic flow meter has the newest electronics and DSP (Digital Signal Processing) Technologies to enable the instrument with convenient solution accurately measure system flow rates. It operates with Single or Dual Path Clamp-On transducers, which can be mounted on any materials of pipes and have the best accuracy of the flow measurement.
All function is same with high end model ultrasonic flow meter model Xonic 100, but only price is compact. clamp on ultrasonic flow meter Xonic 10 can be replace any type of flow meters, such as magnetic flowmeters, orifice flowmeters, turbine flowmeters without pipe cutting or welding. Flow meter ultrasonic Xonic 10 is clamp-on type, so cost for installation or repair is very simple and economical.
Ultrasonic flow meter clamp on type Xonic 10L model is very compact and cheap but all performance is same with high end model Xonic 100L. Xonic 10L model use clamp-on, patented AR mode transducers, so user can install Xonic 10L very accurately. Also, customer can use Transducer Block to eliminate any installation errors.
- AR (Anti-Round) Mode Ultrasonic Flowmeter
- Transit-Time Method
- Oscilloscope Function
- Measure from 0.01 m/s
- Easy & Fast Installation
- Clamp-On Type
- Patented Transducer Block or clamp-on transucers
- Xonic 10LX (NEMA 7)
Ultrasonic clamp on Flow meter Xonic 10L use DSP technics – cross correlation and fast fourier transform – and it analyze ultrasonic signal with pico-seconds time resolutions. Patented AR (Anti-Round) Mode ultrasonic signal make Xonic 10 to measure even lime stone slurry, waste water, and orange sirup juice.
Xonic 10L ultrasonic flow meter is better for small pipe applications such as cut off block area flowmeters to monitor water consumption and flowmeters for chemical plants. Especially, Xonic 10 can measure velocity from 0.02 m/s, so it can be used to
monitor small water leakage of cities in midnight.
Transducer Block is available for 12~300mm pipes, and material is stainless steel and special plastics. It does not need mounting tracks and can be fastened very strongly on pipe with single stainless strap.
Flow computer is very compact and strong. Design is very simple, and user can programe by remocon. It has two 4-20mA DC outputs, two 4-20mA inputs, and RS-232/485
communication port. Also, large graphic color display show ultrasonic signal shape, signal strength and time difference.
The new design, very easy installation type new transducer is patented and can liminate any installation errors by customers. Many clamp-on ultrasonic flow meters have installation errors, so such installation require experienced engineers. But, the length of transducer block is fixed to pipe size, and no need mounting track. The size of transducer block is pre-designed as the pipe size, for example, transducer block for 50mm is about 135mm length.
- Principle : Transit-Time, AR Mode®
- Display : Color Graphic LCD, Flow, Total, Analog Inputs, Delta T Oscilloscope Graphic, Signal Strength
- Transducer : Clamp-On
- Velocity : 0.02~12 m/s
- Accuracy : 1.0 % (single path) ; 0.5% (dual path)
- Sensitivity : 0.01 m/s
- Data Output : 4-20mADC, RS-232C/485
- Datalogger : 4Mb
- Temperature : Flow Computer -20 ~ +60℃
- Transducer -40 ~+12℃
- Power : 12~24VDC (AC adaptor included)
- Enclosre : Flow Computer IP65 , Transducer IP68, Water Proof
More information please click :
Back to Clamp on Ultrasonic Flow Meter
You must be logged in to post a comment.