SAGE SRP INSERTION MASS FLOW METER

SPESIFICATION :

  • STYLE: Remote Insertion Mass Flow Meter
  • SENSOR: Two reference grade platinum RTD clad in 316SS sheath
  • MATERIAL: Wetted metal components: 316SS
  • POWER: 24VDC Standard (12VDC or 115/230VAC optional)
  • POWER DISSIPATION: <2.5 W
  • ELECTRONICS: Remote-Style Microprocessor based (Hybrid-Digital)
  • PROBE ENCLOSURE: Junction Box is Explosion Proof, Class I, Div 2, Groups B, C, D (no electronics)
  • TRANSMITTER ENCLOSURE: Remote mount, NEMA 4 enclosure
  • DISPLAY: High contrast photo-emissive OLED graphical display (Flow Rate, Totalizer, Temperature)
  • TURNDOWN: 100 to 1
  • RESOLUTION: 1000 to 1
  • LOW END SENSITIVITY: 5 SFPM
  • FIELD CALIBRATION CHECK: Yes – Digital system allows raw signal validation (milli-watts)
  • COMMUNICATIONS: Modbus® compliant RS485 RTU or optional HART® communications
  • APPROVALS: CSA C22.2 (24 VDC); ULI604, Class I, Div 2, Groups B, C, D T4 (24VDC); CE (AC Power or 24VDC)
  • FIELD RECONFIGURABLE: Sage ADDRESSER required
  • FLOW ACCURACY: +/- 0.5% of Full Scale +/- 1% of reading (Enhanced accuracy optionally available with limited turn-down)
  • FLOW REPEATABILITY: 0.2%
  • RESPONSE TIME: 1 second time constant
  • GAS TEMPERATURE RANGE: Standard -40° to 200°F (93°C), Optional to 300°F (149°C) and 450°F (232°C)
  • GAS PRESSURE: 500 PSIG (If higher pressure needed, contact Sage)
  • FLOW OUTPUT: 4 to 20 mA for Rate
  • TOTALIZER: 24VDC pulse for Totalized value
  • TEMPERATURE OUTPUT: Through Modbus® only
  • AMBIENT TEMPERATURE: -40°F to 150°F (66°C)
  • PROBE STYLE / LENGTH: 1/2″ OD Probe (3/4″ optional) Lengths 6″ to 36″
  • RELAYS: N/A
  • CABLE LENGTH: 25′ Standard (max length 1000′)
  • FLOW CONDITIONING: Captive Flow Conditioners available upon request with meter purchase
  • TRANSMITTER ENCL DEPTH: DC: 4.35″ ; AC: 5.35″

Written by Rudy Wiratama

rudywinoto.com/wmablog.com/flowmasonic.com