Flow Meter PVC
Flow Meter PVC

Flow Meter PVC

1 minute, 30 seconds Read

Turbine Flow Meter | PVC Flow Meter

Water Meter

This unique system of 2″ to 8″ Flow Meter PVC turbine flow meters uses just one moving part, a precision helical rotor. Rotation of the rotor is electronically detected and processed.


The high-quality jewel bearings and polished zirconia ceramic shafts minimize friction while providing long wear life in non-lubricating fluids. The entire rotor assembly can be easily removed for field service without removing the flow meter from the pipe.

Flow Meter PVC WTP bodies are fabricated from Schedule 80 PVC fittings, WTC bodies from carbon steel tubing, and WTS bodies (available as special order) from stainless steel tubing.

The turbine insert on WTC and WTS meters is machined from a stainless steel casting. The WTP turbine insert is machined from a solid piece of PVC (polypro in 2” size). Turbine rotors on all models are Kynar (PVDF).

Flow Meter PVC  WT flow meters can be ordered with various output options. The basic model (100) comes with pulse output only. An electronic display (Seametrics FT420) is mounted on the 101 models to display flow rate and total (resettable or non-resettable) and provide a programmable pulse or 4-20 mA output.

Other electronics options include a blind 4-20 mA transmitter (AO55) on the 102 model and a battery-powered (FT415) rate/totalizer plus pulse output for applications that lack power (104 models). All of these controls/displays can be mounted on the meter or remotely mounted on a wall or panel up to 2,000 feet away. WT Series flow meters are compatible for use with most other remote-mount Seametrics displays and controls as well.


  • One moving part
  • Low friction jewel bearings
  • Field repairable without removal from the line
  • Choice of materials for chemical compatibility
  • Variety of displays and contr


  • Water treatment
  • Wastewater treatment
  • Cooling water monitoring
  • Industrial fluid control

Similar Posts

Skip to content