PE 202 Flow Magmeter
The PE 202 Seametrics Low-Flow Magmeter is designed for low-flow chemical injection or difficult-to-meter applications with pulsating metering pumps in 3/4” to 1/4” pipe/tube. The housing is made of sturdy splashproof HDPE plastic.
With no moving parts, the PE202 can handle fluids containing particulate matter without clogging or jamming, keeping maintenance at a minimum. With no metallic parts (100% PVDF body and PVDF carbon fiber-filled electrodes), the meter is corrosion-resistant and compatible with a wide range of chemicals. Accuracy is maintained with conductive fluids (>20 micro siemens) of varying viscosities and densities.
The PE meter is compact enough to fit most pump/injection systems. With zero straight pipes required after an elbow, it can be easily mounted in tight spaces. The mounting bracket adds stability.
The PE meter has an optoisolated current-sinking pulse output that can be connected to the Seametrics FT430/440 rate/total display or FT520 batch processor, as well as an optoisolated 4-20 mA current loop for powering analog devices. Outputs and power are provided through a 20 foot (6 meters) cable with an 8-pin female circular connector.
- No moving parts
- Requires no straight pipe
- Pulse and/or 4-20 mA output
- Chemical and corrosion-resistant
- Insensitive to fluid density and fluid viscosity changes
- Chemical injection
- Corrosive materials
- Low flow applications
- Pulsating flows (e.g., metering pump)
|Pipe Size||3/4”, 1/2”, 3/8”, 1/4”|
|Fittings||1/2” NPT fittings standard in 3/4” or 3/8” flow body. NPT threaded adapters are available for the above pipe sizes.|
|Electrodes||PVDF carbon fiber filled|
|Ground||PVDF carbon fiber filled|
|Housing||HDPE with 25% glass|
|Adapters (NPT)||Polypropylene or PVDF|
|Temperature||Ambient||0 ̊ to 130 ̊ F (-18 ̊ to 54 ̊ C)|
|Fluid||32 ̊ to 200 ̊ F (0 ̊ to 93 ̊ C)|
|Flow Range||-075||20 GPM max. (0.2 GPM cutoff)|
|-038||3 GPM max. (0.03 GPM cutoff)|
|Accuracy||-075||±1% plus ±0.005 GPM of reading across a rated range|
|-038||±1% plus ±0.002 GPM of reading across a rated range|
Optoisolated current sinking or current sourcing pulse output: 30 Vdc, 5 mA max
Optoisolated 4-20 mA current loop: 7 Vdc plus load voltage drop min; 50 Vdc max
|-075||500 pulses/liter (1892 pulses/gallon)|
|-038||1000 pulses/liter (3785 pulses/gallon)|
|Power||10–15 Vdc, 150 mA (linear power supply recommended)|
|Conductivity||>20 micro siemens|
|Empty Pipe Detection||Hardware/software, conductivity-based|
|Environmental||NEMA 4X standard; IP66 splashproof standard|
Download Datasheet: Seametrics PE202
|untuk info product dan harga silahkan hubungi : firstname.lastname@example.org|
You must be logged in to post a comment.