Dwyer UXF2 Series Ultrasonic Flow Converter
Dwyer UXF2 Series Ultrasonic Flow Converter

Dwyer UXF3 Series Ultrasonic Flow Meter Converter

1 minute, 39 seconds Read

Dwyer UXF3 Series Ultrasonic Flow Meter Converter are paired with Series SX1 or SX2 sensors in order to utilize the transit-time measure method. Thanks to microprocessor-based electronics, the flow meter can easily be configured from the front keypad to specific applications. The flow meter is suitable for liquid flow measurements for pipes from 1/2 inch to 19.5 feet in diameter.

The accuracy of this flow meter falls within ± 1% of the flow rate. The UXF3 also provides excellent resistance against aerated flow such as sludge, raw sewage, and bubble contained flow. The multilingual display supports a variety of language choices.

The combination of the easy to read LCD screen and front panel buttons along with the variety of language selections makes this flow meter very user friendly. This flow meter incorporates the latest electronics and high-speed digital signal processing technologies (32-bit MPU), realizing high performance and easy operation.

Dwyer UXF3 Series Features

  • High accuracy
  • Excellent resistance against aerated flow
  • Quick response with high-speed microprocessor
  • Multilingual display (English, Japanese, German, French, and Spanish)
  • Large type graphic LCD
  • Front keypad
Another Article:

Dwyer UXF3 Series Specification

Service Liquid flow through which ultrasonic signal can be transmitted (water, sea water, oil, and fluid of unknown velocity).
Inputs Sensor cable radio frequency coaxial cable RG-58A/U2.
Range 0 to ±105 fps (0 to ±32 m/s) (bi-directional flow).
Display LCD with backlight, 16 letters 2 lines.
Accuracy ±1.0% of rate.
Power Requirements 100 to 240 VAC ±10% 50/60 Hz, or 20 to 30 VDC.
Power Consumption AC: 15 VA; DC: 6W.
Temperature Limits Ambient -4 to 131°F (-20 to 55°C).
Output Analog: 4 to 20 mA DC current output; Digital: One mechanical relay output, 240 VAC, 30 VDC, 1 A. Two transistor outputs available, Open collector output: 30 VDC, 0.1A.
Serial Communications (option) RS485.
Enclosure Rating NEMA 4X (IP66).
Material Aluminum alloy.
Electrical Connections Screw terminals.
Mounting Wall or pipe mount.
Weight 10 lb (4.5 kg).

Download Data Sheet: Series UXF3 Ultrasonic Flow Meter Converter

Ref: dwyer-inst.com

Similar Posts

Skip to content