Flowma WUF 200 Ultrasonic Flow Watch
Flowma WUF 200 Ultrasonic Flow Watch

Flowma WUF 200 Ultrasonic Flow Watch

1 minute, 54 seconds Read

Flowma WUF 200 ultrasonic flow watch is very unique in its structural design. It uses a circular magnetic steel to achieve automatic connection during installation. It takes only 2-3 minutes to complete the whole process from installation to measurement. It also adopts the current popular OLED display, which makes it easy to read in low light conditions.

Flowma WUF 200 ultrasonic flow watch  is widely used in the production process for flow measurement and monitoring. The application of the product continuously and effectively controls the flow of the fluid, so as to improve the yield of the product and even save the input of the personnel, bringing benefits to the production enterprise.

Flowma WUF 200 Feature

  • Size range 3/8″ up to 2″ (DN10 ∼ DN50)
  • No professional product knowledge required, installation and measurement can be done based on the guide.
  • Clamp on type, No need to cut the pipe or do any other changes.
  • No moving parts or pressure changes involved, installation can be done without stop provide.
  • WUF 200 can meet different pipe requirements: stainless steel pipe, carbon steel pipe, copper pipe, plastic pipe(PVC, PVDF, PPR, PPH, HDPE, etc.).
  • WUF 200 also satisfies different clean fluid measurements: various acids, alcohols, chemical solvents,alcohol, beverage water, Coca-Cola water, etc.


Product Flow Watch
Model WUF 200
Flow range 0.1m/s~5.0m/s
Accuracy ±2.0%
Repeatability 0.8%
Pipe size φ15-φ63,7 specifications in total
Data storage Daily, monthly, and Annual. Flow Totalizer
Analog output 4~20mA, Maximum load: 600Ω
Alarm output OCT, Upper and lower limit alarm function (optional)
Communication RS485, support Modbus communication protocol
Power supply 24VDC
Cable length 1.8m
Keypad Four light touch buttons
Screen OLED 128*64 display screen
Units Metric and imperial units are available, Cubic Meters(m3), Liters(L),

USA Gallons(GAL)/hour, /min, Default unit setting: m3/h
Totalizer Six bit digit
Piper material Stainless steel pipe, carbon steel pipe, copper pipe, plastic pipe
Case material Aluminum alloy
Environment temp 0℃~50℃
Medium temp 0℃~50℃
Environment humidity 0-95% relative humidity, without condensation
IP Grade IP54

Flowma WUF 200 Dimension

min min
WUF 200-φ15 25 5 58 1.5/φ15 8/φ18
WUF 200-φ20 25 8 58 1.5/φ20 8/φ23
WUF 200-φ25 25 15 58 1.5/φ25 4.5/φ28
WUF 200-φ32 28.5 18.5 58 1.5/φ32 4.5/φ35
WUF 200-φ40 29.5 24 68 1.5/φ38 8.5/φ45
WUF 200-φ50 36 27 78 1.5/φ48 8.5/φ54
WUF 200-φ63 41 32 91 1.5/φ58 7.5/φ64

Read More Article :

Similar Posts

Skip to content