Dwyer TFP-GV Series Gas Turbine Flow Meter utilize a turbine wheel and electro-optical detection to convert flow rates into a linear 0 to 5 VDC output signal for recording and data logging. A power adapter or mating cable assembly is required for operation.
Gas Turbine Flow Meter sensors with electrical transmission output for remote indication of liquid flow rate. Dwyer Gas Turbine Flow Meter are suitable for a wide variety of industrial, commercial, and laboratory flow applications. A power adapter or mating cable assembly is required for operation.
Dwyer TFP-GV Series Features
- Corrosion resistant PPS body
- High repeatability with patented microturbine design
- Design accurately measures flow rates with no zero drift and no required maintenance
Application
- Industrial flow monitoring
- Commercial systems
- Laboratory equipment
| Another Article: |
Dwyer TFP-GV Series Specification
| Service | Clean dry gases compatible with wetted materials. |
| Wetted Materials | PPS, acetal, sapphire, glass, epoxy, and fluoroelastomer. |
| Accuracy | ±3% of FS. |
| Linearity | ±3% of FS. |
| Repeatability | ±0.5% of FS. |
| Temperature Limits | 41 to 131°F (5 to 55°C); Storage: 32 to 158°F (0 to 70°C); Sensitivity: ±0.2% of FS per °C. |
| Pressure Limits | 40 psig (2.8 bar). |
| Process Connection | Compression fitting |
| Power Requirements | 11.5 to 15 VDC. |
| Power Consumption | 35 mA @ 12 VDC. |
| Output Signal | 0 to 5 VDC; minimum 2.5 kΩ load. |
| Electrical Connections | Four-pin power and signal connector. A power adapter or mating cable required for operation. |
| Enclosure Rating | IP10 (NEMA 1). |
| Weight | 0.16 lb (75 g). |
| Agency Approvals | CE. |
Download Data Sheet: Series TFP-GV Gas Turbine Flow Meter
Ref: dwyer-inst.com