Strong Base Anion A strong base anion resin removes the anions associated with the weak acids in the effluent from a strong acid cation unit. Specifically, strong base anions remove silica (from H2SiO3) and carbon dioxide from H2CO3 (carbonic acid). In addition, the strong base anion resin removes anions associated with the strong acids in the […]
Gerand pump test meter manufactured by Gerand Engineering Co. was required to supply Factory Mutual all drawings and independent laboratory test reports on all venturis in order to apply for Factory Mutual approval. The Factory Mutual Approval was issued to Gerand Engineering Co. after the units were tested and met the Approval Standard – Class […]
Overview Advanced level sensing algorithm suppresses the noise level and artifacts and enabled stable measurement. One main unit handles two sensors at once. Two different types of sensors can be installed and each may measures different range. Data logging function to micro SD TM. Flow measurement by measuring catchment level is possible. Usage Level control […]
The FT500-Series is a batching fow processor with additional output controls. It is designed for use with Seametrics fow meters and fow sensors, as well as other manufactuer’s products which have frequency output proportional to fow. In addition to batch functions, the FT500-Series indicates fow rate, and other data in large 3/8” (9.66 mm) digits […]
Multifunction Coriolis Mass Flow Transmitter Series The RHE08 transmitter is designed for field mounting. With a weatherproof exterior, the RHE08 can be wall or panel-front mounted. The UV resistant display window will not crack, craze or cloud over time. Externally mounted buttons provide convenient operator access to all process variables and setup information. Cable entries […]
The WMP-Series is a full-bore, plastic bodied electromagnetic flow meter designed for flow and usage monitoring applications in 1 and 2 inch pipe. The polypropylene flow tube offers corrosion resistance to a wide range of chemicals. Its light weight and easy to install or remove from the pipe for inspection*. With no moving parts, the […]
Dasar Pemilihan Jenisflow meter yang benar adalah adalah pemahaman yang menyeluruh dan jelas tentang persyaratan aplikasi tertentu. Oleh karena itu, perlu waktu dalam mengevaluasi secara keseluruhan dari sifat fluida, proses dan oprasional. Sebelum menentukan flow meter, juga disarankan untuk menentukan apakah informasi flow rate lebih berguna jika disajikan dalam massa atau unit volumetrik. Ketika mengukur aliran bahan […]
WMP-Series Plastic-Bodied Magmeter Electromagnetic Flow Meter Seametrics Flow Meters FEATURES • No moving parts • Minimal straight pipe required • Battery powered • Built-in rate & total indicator • Corrosion resistant • Pulse output (WMP101 only) APPLICATIONS Usage monitoring, such as: • Industrial wastewater discharge • Grey water • Well monitoring • Irrigation GENERAL INFORMATION […]
The DL76 data logger is a battery-powered data logger that can be used with any Seametrics flowmeter. It stores pulses for up to 3 years, depending on the user-selected frequency of reading. Indicator lights on the unit fash to indicate when it is functioning and when the battery is low. The DL76 can be factory-mounted […]
