VSE FLOWMETER – VS SERIES – POSITIVE DISPLACEMENT FLOWMETER VS positive displacement flow meters are volume rate measuring sensors based on the meshing gear principle and are designed for use with liquids. Two precisely matched gear wheels are enclosed in a very accurately machined housing. Gear rotation is sensed by a noncontacting signal pick-up System. […]
RS flow meters measure the flow rate based on the screw pump principle. The newly developed rotor profiles ensure a low-resistance, high-precision measurement while gently transporting the measuring medium. VSE optimized material and technology in the bearing area. The combined radial / axial slide bearing is shielded behind bearing brackets shaped to be flow-optimized. The […]
Gerand pump test meter manufactured by Gerand Engineering Co. was required to supply Factory Mutual all drawings and independent laboratory test reports on all venturis in order to apply for Factory Mutual approval. The Factory Mutual Approval was issued to Gerand Engineering Co. after the units were tested and met the Approval Standard – Class […]
The FT500-Series is a batching fow processor with additional output controls. It is designed for use with Seametrics fow meters and fow sensors, as well as other manufactuer’s products which have frequency output proportional to fow. In addition to batch functions, the FT500-Series indicates fow rate, and other data in large 3/8” (9.66 mm) digits […]
Dasar Pemilihan Jenisflow meter yang benar adalah adalah pemahaman yang menyeluruh dan jelas tentang persyaratan aplikasi tertentu. Oleh karena itu, perlu waktu dalam mengevaluasi secara keseluruhan dari sifat fluida, proses dan oprasional. Sebelum menentukan flow meter, juga disarankan untuk menentukan apakah informasi flow rate lebih berguna jika disajikan dalam massa atau unit volumetrik. Ketika mengukur aliran bahan […]
The DL76 data logger is a battery-powered data logger that can be used with any Seametrics flowmeter. It stores pulses for up to 3 years, depending on the user-selected frequency of reading. Indicator lights on the unit fash to indicate when it is functioning and when the battery is low. The DL76 can be factory-mounted […]
The Sage 200 thermal flow meter is a cost-effective alternative to the Sage Prime which offers the same level of performance. The 200 is manufactured to accommodate our International customers. The flow meter measures gas mass flow and has the same accuracy, repeatability, low-end sensitivity, response time, turndown and resolution as the Prime without some […]
Seametrics Insert Flow Meter Electromagnetic Insertion Flow Meter PRODUCT DETAILS Isolation valve allows installation and removal under pressure Useful in large water utility pipe and other applications where shutdown is not an option EX115 fits pipe from 3″ to 10″ EX215 fits pipe from 10″ to 48″ Meter extends only about 1/8 of pipe diameter, minimizing […]
The WMP-Series is a full-bore, plastic-bodied electromagnetic flow meter designed for flow and usage monitoring applications in 1 and 2 inch pipe. The polypropylene flow tube offers corrosion resistance to a wide range of chemicals. Its light weight and easy to install or remove from the pipe for inspection*. FEATURES • No moving parts […]