Dwyer GFC Series Gas Mass Flow Meter and Controllers combine a straight tube sensor with a restrictor flow element. It is available for flow ranges up to 1000 L/min and offered in aluminum or 316 SS in 1/4″, 3/8″, 1/2″ and 3/4″ sizes. Flow Range Up to 1000 L/min, Pressures Up to 1000 psi, NIST […]
Dwyer DMF Series Digital Mass Flow Meter and Controller an auto tune function to optimize control response for a specific gas under actual process conditions. Self-diagnostic tests are run at power-up to ensure the controller is in optimum working condition. Calibration information for up to 10 gases and conversion factors for up to 256 different […]
Dwyer VFLO Venturi Flowmeter with Magnehelic® Gage is fabricated from aluminum and has a gradual Venturi profile to reduce pressure losses through the meter. Flowmeter can be used in a vertical or horizontal position just by rotating the Magnehelic® gage. The Magnehelic® gage provides a large, clear and accurate display of your differential pressure reading. Each […]
Alicat Scientific Whisper MW-Series Low Pressure Drop Gas Flow Meter measure mass flow and volumetric flow rates when there is little available system pressure, with pressure drops as low as 0.07 PSID. Alicat Scientific Whisper MW-Series General Information Alicat offers a wide range of mass flow meters, including both differential-pressure based and Coriolis technologies. There are […]
Setting Standards in Clamp-on Ultrasonic Gas Flow Measurement The FLUXUS G721 is a technological breakthrough in the ultrasonic clamp-on volume and mass flow measurement of gases. With its state-of-the-art hardware design and powerful digital signal processing, it surpasses any other non-intrusive ultrasonic gas flowmeter in terms of accuracy, reliability, and versatility. Highly sophisticated signal filters, […]
Mass Flow Sensor For clean gas and liquid flow applications Siargo provide products & solutions to your applications The MEMS mass flow sensors are made with the company’s proprietary MEMS mass flow sensing technology featuring large dynamic range, high accuracy and long lifetime. The MEMS sensing elements are designed with a pressure balancer that allows […]
Fox Thermal Mass Flow Meter | Gas Inline Flow Meter | Insertion gas Flow Meter The Fox Model FT1 mass flow meter is a multiple award winner due to its innovative design elements such as the DDC Sensor™ technology platform that allows it to operate using the Gas-SelectX® gas menu selection tool. Insertion & Inline Styles DDC-Sensor™ […]
Fox FT2A Mass Flow Meter The Fox Model FT2A measures the gas flow rate in standard units without the need for temperature or pressure compensation. It provides isolated 4-20mA and pulse outputs for flow rate, and a 4-20mA output for process gas temperature. The pulse output is normally used for totalization. With an on-board 2 […]
Kofloc Flow meter | Variable Area flowmeters, | Gas Flowmeter kofloc | Water flowmeter A Variable Area Flow Meter has afloat in a conical cylinder (tapered tube) with a larger end in the upper section and a smaller end in the lower section. The float moves up and down according to the intensity of the […]