The PE102 magmeter is designed for low-flow chemical injection or difficult-to-meter applications with pulsating metering pumps in 3/4” to 1/4” pipe/tube. The housing is made of sturdy splashproof HDPE plastic. With no moving parts, the PE102 flow meter can handle fluids containing particulate matter without clogging or jamming, keeping maintenance at a minimum. With no […]
The AG2000 is a spool-type electromagnetic flowmeter for use in irrigation applications in 4” to 10” pipe. With no moving parts, these meters have unobstructed flow and are resistant to wear from debris found in ground or surface water. There are no bearings or propeller to wear out. Minimal straight pipe requirements allow AG2000 flow meters to be used in piping configurations […]
Ultrasonic Flow MeterIn Line Ultrasonic Flow Meter High Dynamic Response Inline Ultrasonic Flow meter The model SL3488 inline ultrasonic flowmeter (here in after referred to as SL3488) is a true state-of-the-art transit-time flowmeter designed using PICOFLY technology and 0.01nanosecond (10 picoseconds) resolution; the flow sample rate achieved is 256 discrete flow measurements per second, which provides a true high dynamic response […]
Portable Ultrasonic Flow Meter Hand Held Ultrasonic Flow Meters Flow Meter SiteLab Ultrasonic Flow Meters is devote to make the liquid resource effective use, provide energy saving and emission reduction, reduce liquid resource loss. To measure accurately and coming up with the overall plan to promote the liquid resource use effectively. SiteLab ultrasonic flow meters […]
The PE102 magmeter is designed for low-flow chemical injection or difficult-to-meter applications with pulsating metering pumps in 3/4” to 1/4” pipe/tube. The housing is made of sturdy splashproof HDPE plastic. With no moving parts, the PE102 can handle fluids containing particulate matter without clogging or jamming, keeping maintenance at a minimum. With no metallic parts […]
Electromagnetic Flow Meter EX80-Series insertion electromagnetic flowmeters are designed for use with conductive liquids in 1 to 12” pipe. A choice of materials (stainless steel, brass, and PVC) allows the meter to adapt to a range of temperature, pressure, and corrosive environments. FEATURES • No moving parts • Economical • Durable • Easy to install […]
The WMP-Series is a full-bore, plastic-bodied electromagnetic flow meter designed for flow and usage monitoring applications in 1 and 2 inch pipe. The polypropylene flow tube offers corrosion resistance to a wide range of chemicals. Its light weight and easy to install or remove from the pipe for inspection*. FEATURES • No moving parts • […]
Electromagnetic Flow Meter digunakan untuk mengukur aliran cairan yang mempunyai konduktivitas minimal 5µS/cm namun ada juga yang mensyaratkan minimal konduktivias 20µS/cm. Sensor electromagnetic dipasang pada posisi tertentu guna mengukur aliran cairan tanpa adanya bagian mekanik yang bergerak sehingga cukup aman terhadap cairan yang mungkin sesekali mengandung kotoran, mengandung asam atau sifat korosive. Dalam Hal akurasi Electromagnetic Flow Meter mempunyai […]
The AG2000 is a spool-type electromagnetic flowmeter for use in irrigation applications in 4” to 10” pipe. With no moving parts, these meters have unobstructed flow and are resistant to wear from debris found in ground or surface water. There are no bearings or propeller to wear out. Minimal straight pipe requirements allow AG2000 flow meters to be used in piping configurations […]