Flowmasonic

Paddle Wheel Flow Meter (1)
Paddle Wheel Flow Meter (1)

Paddle Wheel Flow Meter

The IP100/200-Series are adjustable depth insertion paddle wheels that come in brass, PVC, or 316 stainless models to fit 3” to 40” pipe. Adapters mate with standard 1-1/2” (11x/21x) or 2” (15x/25x), or PVC (11x/21x) NPT threaded fi ttings such as saddles and weldolets which may be purchased either locally or from Seametrics.Ruby bearings and a non-drag Hall-effect sensor give these meters the widest fl ow  range of any of the paddle wheel types. A sensor detects the passge of miniature magnets in the six rotor blades. The resulting square-wave signal can be sent for hundreds of feet over unshielded cable without a transmitter and connected directly to many PLC’s and other controls without any additional electronics.

A modular system of electronics can be installed directly on the flow sensor or mounted remotely. The FT430 (externally powered with pulse), FT440 (loop powered), and FT450 (battery powered) all provide digital rate and total displays, as well as a programmable pulse; the FT440 also provides a 4-20 mA analog output. The AO55 is a blind analog (4-20 mA) transmitter. Programmable pulse for pump pacing is available with the PD10.

The “hot-tap” models (IP15x/25x) can be installed or serviced without shutting down the line by means of a 2” full-port isolation valve that comes with a nipple for installation on the pipe fitting.In most circumstances, no special tool is required.

Similar Posts

Skip to content