Seametrics Brass Single Jet with Integral Display Metal-bodied low flow meter in sizes 1/2″ and 3/4″ Versatile square-wave signal connects to PLC’s, counters, and Seametrics controls Rugged nickel-plated brass body Union end connections for easy plumbing One moving part Replaceable non-wetted solid-state pickup The SEB is a plated brass low flow meter suited for clean […]
WJ-Series turbine meters are dry-register mechanical totalizers that offer accurate, economical reading of high flows with low pressure loss. The horizontal-axis turbine drives a vertical shaft, which is magnetically coupled to the sealed register. In addition to mechanical totalizing, registers can be equipped with magnetic pulse reed sensors well suited for remote totalizing, pacing of […]
PE 202 Flow Magmeter The PE 202 Seametrics Low-Flow Magmeter is designed for low-flow chemical injection or difficult-to-meter applications with pulsating metering pumps in 3/4” to 1/4” pipe/tube. The housing is made of sturdy splashproof HDPE plastic. With no moving parts, the PE202 can handle fluids containing particulate matter without clogging or jamming, keeping maintenance at a […]
e Plastic Bodied Electromagnetic Flow meter WMP-Series is a full-bore, plastic-bodied electromagnetic flow meter designed for flow and usage monitoring applications in 1, 2 and 3-inch pipe. The polypropylene flow tube offers corrosion resistance to a wide range of chemicals and fertilizers. It is lightweight and easy to install or remove from the pipe for […]
The iMAG-Series magnetic flow meter is the most economical flanged electromagnetic flowmeter on the market. With electrodes designed to discourage fouling. It is available in 4” to 12” pipe in municipal or industrial water, waste and reclaimed water, pump stations, and packaged plant applications. (For 3” version, see iMAG 4600-300.). Minimal straight pipe requirements allow iMAG-Series meters to be […]
The iMAG-Series magnetic flow meter is the most economical flanged electromagnetic flowmeter on the market. With electrodes designed to discourage fouling, it is available in 4” to 12” pipe in municipal or industrial water, waste and reclaimed water, pump stations, and packaged plant applications. (For 3” version, see iMAG 4600-300.) Minimal straight pipe requirements allow iMAG-Series meters […]
Magnetic flow meter iMAG 4700is the most economical flanged electromagnetic flowmeter on the market produced by seametric instrument. With electrodes designed to discourage fouling, it is available in 4” to 12” pipe in municipal or industrial water, waste and reclaimed water, pump stations, and packaged plant applications. (For 3” version, see iMAG 4600-300.) Minimal straight pipe […]
Seametrics iMAG 4700 Series Electromagnetic Flow Meter The iMAG-Series is the most economical flanged electromagnetic flowmeter on the market. With electrodes designed to discourage fouling, it is available in 3” to 12” pipe in municipal or industrial water, waste and reclaimed water, pump stations, and packaged plant applications. Minimal straight pipe requirements allow iMAG-Series meters […]
The DL76 Data Logger seametrics is a battery-powered data logger that can be used with any Seametrics flowmeter. It stores pulses for up to 3 years, depending on the user-selected frequency of reading. Indicator lights on the unit fash to indicate when it is functioning and when the battery is low. The DL76 Data Logger […]
Batching system | Batch control | Flow batch control The FT500 Series Seametrics Flow Batch Controls is a batching flow processor with additional output controls. It is designed for use with Seametrics flow meters and flow sensors, as well as other manufacturer’s products that have frequency output proportional to flow. In addition to batch functions, […]